Point-to-Point Connections

Prev Next

Learn how to use the Point-to-Point Connection tool in MachineBuilder to attach components or subassemblies at precise locations. This tool is ideal for fine-tuning designs.


Activate the Tool

Select Point-to-Point Connection from the Navigation Bar or press P on your keyboard to enable the tool. This allows you to select specific connection points on your assembly.

  • The Snapping Increment determines the spacing between selectable points on extrusion bodies.

Select Connection Points:

  1. Left-click to choose a connection point on the first component or assembly.

  2. Left-click again to select a point on the secondary component or assembly to attach it.

  3. The first component will snap towards the stationary secondary assembly.

Adjust Orientation:

  1. If multiple orientations are possible, use the on-screen arrows or keyboard arrow keys to adjust the part's orientation.

  2. Click elsewhere or press Enter to confirm placement.

Note: You cannot select two points from the same component or assembly.

Tip: Use the P shortcut to quickly access the Point-to-Point Connection tool.